Don’t forget to take the tape paper off all the sides before you install them….learned that the hard way…Now those solid windows have to be held in with a black tape as well as the keepers.Larry always responds to my questions. Thanks Larry, you are the best!Cleaning the frames with Mothers and 0000 steel wool. Then with a buffer on my drill.See that shine? This frame was bent pretty bad, so Frank torched it, heated up the metal and used blocks and a clamp to try to straighten it.Pretty, Pretty, Pretty, Pretty Straight!New glass, cleaned, polished , new discs and seals installed.These gave us a lot of grief. We had glass cut a few times, we ended up using Plexiglass/Lexan and a RV window seal. I am not happy about the color but i am thinking of a rubber paint to lighten it up.With the Eyebrow all shined up and we put the screws around it before paint to have the authentic look of the original installation without all the leaks.. hopefully…I need to stress this again, don’t forget to take ALL the paper off the tape before installation.The big front window goes in.Waiting for the back window glass, had to be cut a few times.Ahhhhh, yes the Shasta EmblemWe put all the wires in this plastic sleeve to protect them.It works!Now for the brake inspection…The Magnet makes the brakes work. I am learning a few things today, will i remember? Well…I found out what the slot was for, ordered a custom piece for it.Also found out what this bottom slot was for and ordered something for that as well.
